Filter
Top Products
50 Chapter 1 – Control-panel messages EN
1 Check that the telephone cord is securely connected.
2 Check for a dial tone.
• For LJ 3100 and LJ 3150 models: Press and hold S
TOP/CLEAR.
• For LJ 3200 models: Press F
AX/SEND.
3 If necessary, check the wall outlet by plugging in a phone and
attempting to place a call.
4 Plug the product phone cord into a jack for another phone line.
5 If the error persists, replace the LIU.
6 If, after replacing the LIU, the error persists, replace the formatter.
The fax forwarding setting is on, and the product unsuccessfully
received a fax because of low memory or some other reason.
Print the faxes in memory, and then have the sender resend the
missing pages of the document.
The product answered the incoming call, but could not determine that
the caller was a fax machine.
1 Allow the product to retry sending the fax.
2 Unplug the product telephone cord from the wall, plug in a
telephone, and then try making a call.
3 Plug the product phone cord into a jack for another phone line.
4 If the error persists, replace the LIU.
1 Check the fax number, and then try resending the fax.
2 If the message appears again, try sending to another fax machine,
or try again later.
No dial tone
No document sent
No fax detected
No fax in (number) tries