Filter
Top Products
EN Numerical messages 81
1
First X = Device number in chain
Second X = Device type (3 types):
1 = Input
2 = Output
3 = Stapler/stacker unit
yy = Device-specific error
1 Press G
O to clear the message.
2 Turn the printer off and then on.
3 Check and reseat all cables between the printer and the specified
device.
4 Reseat the external paper-handling device.
1 Print a configuration page and check the printer settings to
determine which values have changed.
2 Hold down C
ANCEL JOB while turning the printer on. This will clean
up the NVRAM by removing old areas that are not being used.
An error occurred in the printer permanent storage, and one or more
printer settings has been reset to its factory default.
Print a configuration page, and then check the printer settings to
determine which values have changed.
66.xx.yy [type] Failure alternates with
Check cables and cycle power
68 NVRAM full check settings
68.x Permanent storage error alternates with
Check settings