Filter
Top Products
48 Chapter 1 – Control-panel messages EN
1 Load the requested media into tray 1.
2 Press G
O if the appropriate media is already loaded in tray 1.
3 Press -V
ALUE+ to scroll through the available types and sizes.
4 Press S
ELECT to accept the alternate type or size.
1 Reload the unscanned pages and resend them to finish the fax job.
2 Scan the unscanned pages to the computer, and then fax them from
the computer.
Add more memory to the printer or simplify the print job.
This message should clear automatically when the next task starts (for
example, when you start a copy or receive a fax).
1 Press S
TOP/CLEAR to clear the error.
2 Use the HP LaserJet Director to make multiple copies of large
documents, or break the job into smaller jobs containing fewer
pages.
The product memory has been almost completely filled.
Allow the product to finish the job, or press S
TOP/CLEAR to cancel the
job.
Manually feed [type] [size]
Memory full - send unscanned pages
Memory full - stored data lost
Memory is full
Memory low/Only 1 copy/Press STOP
Memory low/STOP to cancel