Filter
Top Products
116 Chapter 2 – Service mode EN
NVRAM initialization
The NVRAM initialization sets all default variables stored in NVRAM
back to factory default values or to a default ROM value, depending on
the variable, and performs a system reset.
CAUTION
Performing NVRAM initialization can cause the product to violate local
telephone regulations. Reset the language and country code after
performing NVRAM initialization.
The NVRAM initialization resets the following:
• All menu settings to factory default values, including fax header and
company name
• Factory settings such as formatter number, page counts, and factory
paper settings
• Fax memory (all faxes in memory are erased)
• All localization settings, including language and country code
To perform an NVRAM initialization
1 Unplug (or turn off) the printer from the power source.
2 Press and hold down S
YMBOLS and ENTER/MENU.
3 Continue to hold down the buttons while you plug back in (or turn
on) the printer, through the entire power-on sequence.
4 When the control-panel display reads
PERMANENT STORAGE
INITIALIZE or HP LASERJET 3200, release the buttons.
5 Allow the printer to return to the Ready state before using the
printer.