Filter
Top Products
EN Transparency specifications 163
5
Transparency specifications
Preventing jams caused by transparencies
Use these preventive measures to avoid printer malfunctions caused by
transparencies:
• Use the straightest paper path to avoid curling and other problems.
• Use transparencies with the correct resistivity.
• Use transparencies that meet HP specifications for fusing
compatibility.
• Remove each printed sheet from the tray and place it on a flat
surface before printing the next sheet.
• Print transparencies to the rear output bin to avoid jams (LJ 2200).
Transparency specifications
Category Specifications
Caliper 0.100 to 0.110 mm (3.9 to 4.3 mils)
Cutting angle 90° ± 0.2°
Finishing precision Cut sheet to within 0.8 mm (0.03 in) of nominal
and ± 0.2° of square.
Fusing
compatibility
Overhead transparency material must be
compatible with the heat and pressure of the
fusing process. Materials must not discolor, melt,
offset material, or release hazardous emissions
when heated to 175° to 230° C (347° to 446° F)
for 0.1 second.