Filter
Top Products
EN Alphabetical messages 65
1
Memory or file system failures would not allow the printer to store the
job.
1 Reseat the RAM DIMMs or the EIO hard disk.
2 Install additional memory or an EIO hard disk.
When printing, the incorrect printer driver was selected, or an error
occurred with the parallel interface.
1 After selecting the Print command in the software program you are
using, select the HP LaserJet 3100 or 3150 as the printer.
2 Reprint the job.
3 Disconnect and reconnect the parallel cable from both the product
and the computer.
1 Check the fax number and try resending the fax.
2 If the message appears again, try sending to another fax machine,
or try again later.
Load a supported media size in the tray. See chapter 5 for a list of
supported media sizes.
Unable to store job
Unrecognized format
Unsuccessful call
Unsupported size in tray [yy]