Filter
Top Products
EN LaserJet 2200 Series printer control-panel light messages 21
1
Buffer flow error (22)
Status log code: 30027
l Verify that the
printer cable is
connected properly
and fully seated at
connections. Always
use a high-quality
cable. Some non-
HP cables might be
missing pin
connections or
might otherwise not
conform to IEEE-
1284 specifications.
l Replace the
formatter.
Bad connection (40)
Status log code: 30018
l The connection
between the printer
and the EIO card is
bad.
l Press GO to clear
the error message
and continue
printing.
l If the error message
persists, turn the
printer off and reset
the EIO card. Turn
the printer on.
l Replace the EIO
card.
Continuable attention error secondary codes (continued)
Control-panel light
pattern
Continuable
attention error
secondary message
Recommended
action