Filter
Top Products
42 Chapter 1 – Control-panel messages EN
Choose one of the following:
• Press S
ELECT to accept the media type, and then press GO.
• Press +V
ALUE- to change the type, press SELECT to accept the new
type, and then press G
O to continue.
Resend the fax or ask the sender to resend the fax to you.
1 Turn power off and then back on.
2 Replace the firmware DIMM.
1 If you set up faxes to be sent at a future time or to be polled, print a
fax log to identify which faxes were lost. Then reenter the faxes.
2 Faxes that were received to memory (instead of printing) have been
lost. Ask the sender to resend the fax.
1 Call the recipient to ensure that the fax machine is on and ready.
2 Check that you are dialing the correct fax number.
3 Check that the redial option is enabled.
4 Unplug the telephone cord from both the product and the wall, and
then reconnect the cord.
5 Unplug the product telephone cord from the wall, plug in a
telephone, and then try making a call.
6 If the error persists, replace the LIU.
Envelope feeder type - [xxxxx]
Errors likely in pages: (page range)
Fatal system error
Fax document was lost
Fax does not answer/Canceled send