Filter
Top Products
158 Chapter 5 – Media specifications EN
Envelope specifications
Envelope specifications
Category Specifications
Basis weight All printers except LJ 2200: Should not exceed
105 g/m2 (28 lb)
LJ 2200 printer only: 100 g/m2 (27 lb)
Caliper 0.084 to 0.14 mm (3.3 to 5.5 mils) single-layer
thickness
Curl All printers except LJ 2200: Less than 6 mm
(0.25 in) curl across entire surface
LJ 2200 printer only: Less than 5 mm (0.2 in)
curl across entire surface
Finishing Accurate, sharply creased folds with no more
than two thicknesses of paper at the leading edge
Fusing
compatibility
Must not scorch, melt, offset, or release
hazardous emissions when heated to
175° to 230° C (347° to 446° F) for 0.1 second
Moisture content 4 percent to 6 percent by weight
Paper Must meet all the normal paper specifications
Smoothness 100 to 200 Sheffield