Filter
Top Products
EN Label specifications 161
5
Label specifications
Label specifications
Category Specifications
Adhesive Must not be on any external surfaces of the label
before, during, or after printing. Label construction
and die-cutting must not allow labels to peel off
during transport, printing, or fusing.
Caliper All printers except LJ 2200: Must not exceed
0.18 mm (0.007 in).
LJ 2200 only: Must not exceed 0.14 mm
(0.005 in).
Curl In ream: flat within 5 mm (0.2 in).
Finishing
precision
Cut sheet within 0.79 mm (0.031 in) of nominal
and 0.20° square.
Fusing
compatibility
All adhesions, carrier sheets, top sheets, and
other materials used in label construction must be
compatible with the heat and pressure of the
fusing process. Materials must not discolor, melt,
offset, or release hazardous emissions when
heated to 175° to 230° C (347° to 446° F) for
0.1 second.
Packaging Use moisture-proof wrap to preserve properties.