HP (Hewlett-Packard) NW280AAABA Calculator User Manual


 
Getting started 45
screen with as a menu item, you can select an item
on that screen to send it to another HP Prime.
You use one of the
supplied USB cables to
send objects from one
HP Prime to another.
This is the micro-A–micro B USB cable. Note that the
connectors on the ends of the USB cable are slightly
different. The micro-A connector has a rectangular end
and the micro-B connector has a trapezoidal end. To
share objects with another HP Prime, the micro-A
connector must be inserted into the USB port on the
sending calculator, with the micro-B connector inserted
into the USB port on the receiving calculator.
General procedure The general procedure for sharing objects is as follows:
1. Navigate to the screen that lists the object you want
to send.
This will be the Application Library for apps, the List
Catalog for lists, the Matrix Catalog for matrices, the
Program Catalog for programs, and the Notes
Catalog for notes.
2. Connect the USB cable between the two calculators.
The micro-A connector—with the rectangular
end—must be inserted into the USB port on the
sending calculator.
3. On the sending calculator, highlight the object you
want to send and tap .
In the illustration at
the right, a program
named
TriangleCalcs
has been selected in
the Program Catalog
and will be sent to the
connected calculator
when is
tapped.
Micro-A: sender Micro-B: receiver