Filter
Top Products
• “Online Replacement (OLR)” (page 199)
Describes the replacement of a PCI/PCI-X/PCIe card without powering down the server.
This action requires suspending the associated driver. The existing driver for the old card
must be compatible with the new card.
CAUTION: If you are performing OLR on HP-UX 11i version 1 (and later), the card you
install must be exactly the same as the card you replace. This is also known as like-for-like
replacement.
• “Removing a PCI/PCI-X/PCIe Card Offline” (page 201)
Describes the removal of a PCI/PCI-X/PCIe card after powering down the server.
• “Installing a PCI/PCI-X/PCIe Card Offline” (page 201)
Describes the installation of a PCI/PCI-X/PCIe card after powering down the server.
Figure 6-10 shows the PCI/PCI-X/PCIe slot identification and card divider locations.
NOTE: Slots one through eight are full-length; slots nine and ten are short-length.
Figure 6-10 PCI/PCI-X/PCIe Slot Identification and Card Divider Locations
123456789
10
11
12
9
Slot 9
5
Slot 5
1
Slot 1
Removing and Replacing a Hot-Pluggable PCI/PCI-X/PCIe Card 193