Filter
Top Products
Figure 6-19 Removing the Processor Board Assembly
Processor Board Assembly
Processor Board
Processor Board Assembly
Front Chassis View
Access Door
Assembly Carrier Tray
(Grasp Here)
Processor Board
Assembly Carrier tray
(Grasp Here)
Access Door
Release Button
Replacing the Processor Board Assembly
To replace the processor board assembly, follow these steps:
1. Align the edges of the processor board assembly with the assembly guides in the chassis.
2. Slide the processor board assembly into the chassis until it begins to seat into the socket
located on the midplane board.
3. Push the processor board access door upward until it locks into position.
4. Replace the memory carrier assembly. See “Replacing the Memory Carrier Assembly”
(page 205).
5. Replace the memory carrier assembly cover and latch the top cover release lever closed. See
“Replacing the Memory Carrier Assembly Cover” (page 183).
6. If rack installed, slide the server completely into the rack. See “Inserting the Server into the
Rack” (page 180).
7. Reconnect the power cables and power on the server. See “Powering On the Server”
(page 94).
Removing and Replacing a Dual-Core Processor
The HP Integrity rx3600 uses dual-core processors. That is, each processor contains two cores
that function as separate processors. Dual-core processors double the processing power of the
server while maintaining the physical dimensions of a single processor.
The server can contain one or two dual-core processors that provide the following configuration
options:
• 1P/2C (One processor/two cores)
• 2P/4C (Two processors/four cores)
218 Removing and Replacing Server Components