Filter
Top Products
held for at least four seconds. The following values are reset to factory defaults when the button
is held for at least four seconds:
• Serial terminal baud rate settings
• User names and passwords
Core I/O Board Ports
Table 1-6 lists a description of the core I/O board ports shown in Figure 1-14.
Table 1-6 Core I/O Board Ports
DescriptionPort
LAN port dedicated for remote access to the iLO 2 MP10 Base-T/100 Base-T LAN
Local serial portAuxiliary Serial
Local serial port that provides a console connection to the serverConsole Serial (iLO 2 MP)
Two public USB 2.0 ports used primarily to connect to a keyboard and mouse
for console input functions (Windows and Linux operating systems only)
USB
VGA port used primarily to connect to a monitor that displays console output
(Windows and Linux operating systems only)
VGA (optional)
iLO 2 MP Status LEDs
Table 1-7 shows the states and status of the iLO 2 MP status and LAN LEDs.
Table 1-7 iLO 2 MP Status and LAN LEDs
StatusStatesiLO 2 MP LED
Standby power is onSolid greenStandby power
iLO 2 MP self test running
1
Amber
iLO 2 MP Self test
Self test completedOff
Operational and functionalFlashing greeniLO 2 MP Heartbeat
Operational and functionalFlashing greenBMC Heartbeat
ActivityBlinking green
Link Status Link with no activitySolid green
No linkOff
100 Mb linkSolid amber
Link Speed
10 Mb linkOff
1 The LED is solid amber when ac power is first applied. It remains solid amber for a few seconds until the iLO 2 MP
completes its self test; the LED then turns off.
System LAN
The system LAN functionality is provided by the LAN core I/O card. The ports on the LAN core
I/O card are two RJ-45 style 10 Base-T/100 Base-T/1000 Base-T system LAN ports:
Table 1-8 show the system LAN link status and speed LEDs states and status.
Controls, Ports, and LEDs 43