Filter
Top Products
Example D-6 boottest command
Shell> boottest
BOOTTEST Settings Default Variable
Selftest Setting
------------- -------------------------
booting_valid On (OS speedy boot aware)
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
Example D-7 boottest early_cpu off command
Shell> boottest early_cpu off
BOOTTEST Settings Default Variable
Selftest Setting
------------- -------------------------
booting_valid On (OS speedy boot aware)
early_cpu Skip this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
cpuconfig
Use this command to display the configured or deconfigured state of processors in the system
and enables the user to configure or reconfigure processors.
Syntax
cpuconfig <cpu> <on | off>
Parameters
<cpu> specify a processor
<on | off> state to set the processor to
Operation
Issue cpuconfig with no parameters to display the configured or deconfigured status of all
processors. To reconfigure CPUs, specify a CPU number and a state on or off. If you enter a
valid state that is different from the current state of a CPU, its status changes on the next boot.
324 Utilities