Intel IXF1104 Computer Hardware User Manual


 
Intel
®
IXF1104 4-Port Gigabit Ethernet Media Access Controller
199 Datasheet
Document Number: 278757
Revision Number: 009
Revision Date: 27-Oct-2005
RX FIFO Errored
Frame Drop Counter
on Port 2
This register counts all frames dropped from the
RX FIFO for port 2 by meeting one of the
following conditions:
Frames are removed in conjunction
with the“RX FIFO Errored Frame
Drop Enable ($0x59F)” and the “RX
Packet Filter Control ($ Port_Index +
0x19)”.
Frames are greater than the “Max
Frame Size (Addr: Port_Index +
0x0F)”.
This register is cleared on Read.
0x5A4 R 0x00000000
RX FIFO Errored
Frame Drop Counter
on Port 3
This register counts all frames dropped from the
RX FIFO for port 3 by meeting one of the
following conditions:
Frames are removed in conjunction
with the“RX FIFO Errored Frame
Drop Enable ($0x59F)” and the “RX
Packet Filter Control ($ Port_Index +
0x19)”.
Frames are greater than the “Max
Frame Size (Addr: Port_Index +
0x0F)”.
This register is cleared on Read.
0x5A5 R 0x00000000
1. RO = Read Only, No clear on Read; R = Read, Clear on Read; W = Write only; R/W = Read/Write, No clear;
R/W/C = Read/Write, Clear on Write
Table 126. RX FIFO SPI3 Loopback Enable for Ports 0 - 3 ($0x5B2)
Bit Name Description Type
1
Default
Register Description:
Enables the TX SPI3 port to send packets into the RX_FIFO instead of
into the TX FIFO, creating a SPI3 loopback.
0x00000000
31:12 Reserved Reserved RO 0x00000
11
SPI3 loopback enable
for Port 3
0 = Disabled
1 = Enabled
R/W 0x0
10
SPI3 loopback enable
for Port 2
0 = Disabled
1 = Enabled
R/W 0x0
9
SPI3 loopback enable
for Port 1
0 = Disabled
1 = Enabled
R/W 0x0
8
SPI3 loopback enable
for Port 0
0 = Disabled
1 = Enabled
R/W 0x0
7:0 Reserved Write as 0, ignore on Read. R/W 0x00
1. RO = Read Only, No clear on Read; R = Read, Clear on Read; W = Write only; R/W = Read/Write, No
clear; R/W/C = Read/Write, Clear on Write
Table 125. RX FIFO Errored Frame Drop Counter Ports 0 - 3 ($0x5A2 - 0x5A5) (Sheet 2 of 2)
Name Description Address Type Default