Filter
Top Products
Intel
®
IXF1104 4-Port Gigabit Ethernet Media Access Controller
221 Datasheet
Document Number: 278757
Revision Number: 009
Revision Date: 27-Oct-2005
Table 152. Clock and Interface Mode Change Enable Ports 0 - 3 ($0x794)
Bit Name Description Type
1
Default
Register Description:
This register is used when a change to the operational mode or speed
of the IXF1104 MAC is required. This register ensures that when a change is made that the
internal clocking of the IXF1104 MAC is managed correctly and no unexpected effects of the
operational or speed change are observable on the line interfaces.
0x00000000
31:4 Reserved Reserved RO 0x0000000
3
Clock and Interface
Mode Change Enable
Port 3
2
Enables internal clock generator for Port 3 to
sample the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
0 = Set to zero when changes are being made to
the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
1 = Set to 1 for the configuration changes to take
effect.
R/W 0
2
Clock and Interface
Mode Change Enable
Port 2
2
Enables internal clock generator for Port 2 to
sample the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
0 = Set to zero when changes are being made to
the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
1 = Set to 1 for the configuration changes to take
effect.
R/W 0
1
Clock and Interface
Mode Change Enable
Port 1
2
Enables internal clock generator for Port 1 to
sample the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
0 = Set to zero when changes are being made to
the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
1 = Set to 1 for the configuration changes to take
effect.
R/W 0
0
Clock and Interface
Mode Change Enable
Port 0
2
Enables internal clock generator for Port 0 to
sample the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
0 = Set to zero when changes are being made to
the “MAC IF Mode and RGMII Speed ($
Port_Index + 0x10)" and the “Interface Mode
($0x501)".
1 = Set to 1 for the configuration changes to take
effect.
R/W 0
1. RO = Read Only, No clear on Read; R = Read, Clear on Read; W = Write only; R/W = Read/Write, No
clear; R/W/C = Read/Write, Clear on Write
2. Refer to Section 6.1, “Change Port Mode Initialization Sequence” on page 130 for the proper sequence to
change the port mode and speed in conjunction with this register.