Lexmark 6500 Series Printer User Manual


 
Select a higher print quality
1 Depending on your print job, press Copy Mode, Scan Mode, or Photo Card.
2 Press .
3 Press or repeatedly until Quality appears.
4 Press .
5 Press or repeatedly until the quality you want appears.
6 Press .
Check print cartridges
If the document still does not have the print quality you want, follow these steps:
1 Align the print cartridges. For more information, see “Aligning print cartridges” on page 133. If print quality has
not improved, continue to the next step.
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on
page 133. If print quality has not improved, continue to the next step.
3 Install the print cartridges. For more information, see “Installing print cartridges” on page 130.
4 Wipe the print nozzles and contacts. For more information, see “Wiping the print cartridge nozzles and contacts”
on page 133.
If print quality is still not satisfactory, replace the print cartridges. For more information, see “Ordering supplies”
on page 135.
Poor text and graphic quality
Blank pages
Dark print
Faded print
Incorrect colors
Light and dark bands in print
Skewed lines
Smudges
Streaks
White lines in print
These are possible solutions. Try one or more of the following:
Check ink
Check the ink levels, and install new print cartridges if necessary.
Review steps to improve print quality
See “Improving print quality” on page 154.
Remove sheets as they are printed
To avoid ink smudging when you are working with the following media, remove each sheet as it exits, and allow it
to dry:
Documents with graphics or images
Photo paper
Heavyweight matte or glossy paper
155