Filter
Top Products
Configuring WAN Access
Configuring inbound calls
MAX 6000/3000 Network Configuration Guide 3-67
Does call have ISDN subaddress?
Do not answer.
No
Does Sub-Adr=TermSel?
Yes
Determine if call is net-to-net:
See MAXDAX section. Is the MAXDAX call net-to-net?
If Sub-Adr=Routing and the called number has an ISDN subaddress that matches
setting of V. 11 0 , DM, LAN, or Serial parameter, the call is not net-to-net.
If the called number (without subaddress) matches an Ans N# setting in an Ethernet
(Mod Config) or V.110 profile, or any digital modem profile, the call is not net-to-net.
If the called number (without subaddress) matches Ans # in a Net/T1 Line N profile, or
the call service matches Ans Svc in a Net/T1 Line N profile, or the call arrives on a
Leased 1:1 channel (see PBX Type parameter), it is net-to-net PBX.
If the called number (without subaddress) matches Ans N# in a Host/BRI or BRI/LT
profile or the call is answered on a channel whose slot (Ch N Slot, B1 Slot, B2 Slot)
parameter points to a Host/BRI or BRI/LT module, it is net-to-Net/BRI.
Yes
No
Is net-to-net
Route to indicated
T1 channel
or BRI line.
Is not net-to-net.
Does Sub-Adr=Routing?
Yes
Does subaddress match DM?
No
Is a digital modem available?
Reject call.
No
Does subaddress match V.11 0 ?
Is V.110 module available?
Reject call.
No
Route call to it.
Yes
Route call to it.
Yes
No
Does subaddress match Serial?
Does called number with/without
subaddr. match Ans N# Port
Config (invs-mux) profile
setting?
If port available,
Yes
Yes
No
Is call answered on a channel whose slot (Ch N
Slot, B1 Slot, B2 Slot) and port (Ch N Prt/Grp,
B1 Prt/Grp, B2 Prt/Grp) parameters point to a
serial-host port?
Yes
route call to it.
Otherwise, reject
call.
If port (invs-mux)
No
Is a serial-host (invs-mux) port
available?
Reject call.
No
Route call to it.
Yes
No
Does subaddress match LAN?
Is bridge/router module
available?
Reject call.
No
Route call to it.
Yes
No
Continue next page: “A”
Continue next page: “B”
No
Yes
Yes
Yes
Is call received on a channel whose telephone number parameter
(Ch N #, Pri Num, Sec Num) does not match the called number?
Yes
Do not answer.
Telephone number matches or called number not provided.
available, route
call to it. Other-
wise, reject call.