Lucent Technologies 6000 Network Router User Manual


 
Index-8 MAX 6000/3000 Network Configuration Guide
Index
I
Host BRI
BRI-to-BRI local call, configuring
, 3-43
configuring
, 3-40, 3-41
inbound calls routing, 3-41
outbound calls, making
, 3-42
Host interface
configuring
, 3-51
Host N Enet parameter
, 4-99, 9-22
Host N IP parameter
, 4-99, 9-22
host route advertisements
suppressing
, 9-31
Host#N parameter
, 9-30
Host/AIM6
dual-ports
, 3-51
parameters
, 3-51
ports, configuring
, 3-48
Host/Dual
dual ports
, 3-51
parameters
, 3-51
ports, configuring
, 3-48
hunt group
, 3-6, 3-58, 4-57
configurations for MAX stacks
, 4-60
I
ICMP (Internet Control Message Protocol), 9-56
ICMP Redirects parameter
, 9-62
Idle limit parameter
, 11-13, 11-18
IDSL (ISDN Digital Subscriber Line)
voice-call support
, 3-45
IF Adrs parameter
, 9-32
Ifmgr command
, 5-18
IGMP (Internet Group Management Protocol)
, 10-1
multicast trace packets
, 10-1
version-1, version-2
, 10-1
Ignore Def Rt parameter
, 9-8, 9-61
Immed Host parameter
, 4-86
Immediate mode
, 4-83, 4-86
configuring
, 4-86
Immediate Modem
dialing out
, 4-90
Inactivity Timer parameter
, 6-9
Inc Ch Count parameter
, 4-48, 4-49
incoming fax
configuring
, 7-6
InOctets
, 3-28
Input Filters (1-12) parameters
, 15-5
interface-based routing
, 9-6
interfaces
Ethernet slot
, 3-3, 3-4
menu item, corresponding (MAX 3000)
, 3-4
interfaces, continued
menu item, corresponding (MAX 6000)
, 3-3
interfaces, IP routing table
, 9-5
Internet services
configuring
, 2-6
IP router, MAX functioning as
, 2-6
Multicast Backbone (MBONE)
, 2-6
Open Shortest Path First (OSPF)
, 2-6
Virtual Private Networks (VPN)
, 2-6
Interval parameter
, 4-92
Inverse ARP (Inverse Address Resolution Protocol)
, 9-8
RFC 1293, RFC 1490
, 9-8
Inverse Multiplexing
Ascend Inverse Multiplexing (AIM)
, 3-48
Bandwidth ON Demand Interoperability Group
(BONDING)
, 3-48
See AIM (Ascend Inverse Multiplexing)
IP (Internet Protocol)
and RIP-v2
, 9-33
Default route
, 9-59
ping
, 9-10
IP addresses
assigning
, 9-19
assignment of
, 4-97
automatically assigned
, 9-19
dial-in host
, 9-32
dynamic assignment of
, 9-36
filtering
, 15-14
local spoofing, preventing
, 15-15
NAT
, 9-23
parameters (for remote device)
, 9-32
remote devices
, 4-30
remote, specifying
, 9-32
reserved
, 9-20
reserved, DHCP services
, 9-19
IP addressing, dynamic
, 9-10
address assignment
, 9-10
address pools, specifying
, 9-10
address, overriding
, 9-11
configuring
, 9-36
enabling
, 9-32
IP Adrs parameter
, 9-7
IP Direct
configuration
, 9-33
connection, configuring
, 9-40
parameter
, 9-33
telnet sessions
, 9-41
IP fax
assigning bandwidth
, 7-3
configuring
, 7-5
defined
, 7-1
incoming faxes, configuring
, 7-6
outgoing faxes, configuring
, 7-7
parameters
, 7-2