Filter
Top Products
15-22 MAX 6000/3000 Network Configuration Guide
Defining Static Filters
Defining IPX filters
Input filters...
In filter NN
Valid=No
IPTos...
Src Mask=0.0.0.0
Src Adrs=0.0.0.0
Dst Mask=255.255.255.255
Dst Adrs=10.168.6.24
Protocol=6
Src Port Comp=Eql
Src Port #=23
Dst Port Cmp=None
Dst Port #=0
Precendence=010
Type of Service=Latency
Following is a RADIUS user profile that contains a comparable filter specification:
jfan-pc Password="secret"
Service-Type=Framed-User,
Framed-Protocol=PPP,
Framed-IP-Address=10.168.6.120,
Framed-IP-Netmask=255.255.255.0,
Ascend-Filter="iptos in dstip 10.168.6.24/32 dstport=23 precedence
010 type-of-service latency"
Note: Filter specifications cannot contain newline indicators. The preceding example shows
the specification on two lines for printing purposes only.
Defining IPX filters
IPX filter specifications are not supported in RADIUS. They affect only NetWare packets, and
their main purpose is to identify specific networks, hosts, or services. In a local Filter profile,
the IPX Filter subprofile contains the following parameters (shown with their default values):
Input filters...
In filter NN
Valid=Yes
IPX...
Src Network Adrs=0.0.0.0
Dst Network Adrs=0.0.0.0
Src Node Adrs=0.0.0.0
Dst Node Adrs=0.0.0.0
Src Socket #=None
Src Socket Cmp=0
Dst Socket #=None
Dst Socket Cmp=0