Lucent Technologies 6000 Network Router User Manual


 
Index
C
MAX 6000/3000 Network Configuration Guide Index-3
bridging
AppleTalk
, 13-2
ARP broadcasts
, 14-3
Bridge Adrs profile
, 14-5
broadcast addresses
, 14-2
defined
, 14-1
disadvantages of
, 14-2
enabling (Bridging parameter)
, 14-3
establishing
, 14-3
IPX
, 14-12
IPX client bridge
, 14-14
IPX server bridge
, 14-15
learning
, 14-4
name, setting
, 14-3
promiscuous mode
, 14-3
proxy mode, configuring
, 14-16
table, managing
, 14-4
table, physical (MAC) address
, 14-2
transparent
, 14-4
bridging connections
Answer profile
, 14-5
attributes for
, 14-8
Connection profile
, 14-5
Names/Passwords profile
, 14-5
Bridging parameter
, 14-3
bridging table
, 4-19
BRI/LT
configuring
, 3-43, 3-45
diagnostics
, 3-45
broadcast addresses
, 14-2
broadcast traffic
reducing
, 13-1
Buffer Chars parameter
, 4-85
bundle ownership
, 4-57
C
Call command, 6-19
call filters, applying
, 15-2, 15-28
call management
Combinet encapsulation, accepting/rejecting
, 4-5, 4-9
incoming/outgoing calls, enabling/disabling
, 4-38
switch calls, duration maximum
, 3-50
Call profile
data service specification
, 4-39
call profile
defined
, 3-12
call routing
dial out number
, 3-53, 6-3
Call Type parameter
, 5-5, 6-3, 6-6
callback security
, 2-4
Call-by-Call parameter
, 4-40, 5-6, 6-3
Caller-ID authentication
, 2-5
calls
Call command
, 6-19
Clr command
, 6-20
destination channel group, specifying
, 3-77
determining answer to
, 3-49
dial out telephone number
, 4-18
DTE-initiated
, 6-33
Facilities command
, 6-20
FT1-B&O
, 3-56
Full command
, 6-20
Half command
, 6-20
Host-initiated
, 6-33
incoming, configuring channels
, 3-77
incoming, setting parameters for
, 3-77
Listen command
, 6-20
MP/MP+, spanning
, 4-57
number of channels, specifying
, 3-50
origin of port, specifying
, 3-49
outbound, configuring channels
, 3-76
outgoing, setting parameters for
, 3-76
Reset command
, 6-21
routing flowchart
, 3-75
routing, inbound
, 3-59, 3-66, 4-116
routing, outbound
, 3-69
single-channel, configuring
, 3-57
Status command
, 6-21
two-channel dual-port
, 3-58
Carrier Detect (CD) signal
, 3-50
CBCP (Callback Control Protocol)
defined
, 4-7
LCP
, 4-7
parameter
, 4-22
Cell First parameter
, 4-84
Cell Level parameter
, 4-84
Ch N parameters (E1)
, 3-25
Ch N parameters (T1)
, 3-11, 3-24, 3-77
channel
group
, 3-76
mapping
, 3-78
real
, 4-58
single call, configuring
, 3-57
stacked
, 4-58
CHAP (Challenge Handshake Authentication Protocol)
,
2-4, 4-2
authentication
, 4-45, 4-78, 4-79
bidirectional
, 4-64
CIDR (Classless Inter-Domain Routing)
, 8-3
circuits
NNI-NNI
, 5-28
UNI-NNI
, 5-30
UNI-UNI
, 5-26
Clear Call parameter
, 4-85
client DNS, RADIUS attributes
, 9-15