Filter
Top Products
Setting Up Virtual Private Networks
Configuring ATMP tunnels
MAX 6000/3000 Network Configuration Guide 11-25
Dial #=555-1213
Route IP=Yes
Encaps options...
Send Auth=CHAP
Recv PW=foreign-pw
Send PW=home-pw
IP options...
LAN Adrs=10.65.212.226/24
2 Open a Connection profile and configure a nailed WAN link to the Network B home
network. For example:
Ethernet
Connections
any Connection profile
Station=homenet
Active=Yes
Encaps=MPP
Dial #=N/A
Calling #=N/A
Route IP=Yes
IP options...
LAN Adrs=5.9.8.2/24
Telco options...
Call Type=Nailed
Group=1,2
Session options...
ATMP Gateway=Yes
MAX ATMP Tunnels=0
ATMP RIP=Send-v2
3 Exit the profile and, at the exit prompt, select the exit and accept option.
Supporting mobile client routers (IP only)
To enable an IP router to connect as a mobile client, the Foreign Agent’s RADIUS entry for the
mobile client must specify the same subnet mask as the one that identifies the home network.
For example, to connect to a home network whose router has the following address:
10.1.2.3/28
The Foreign Agent’s RADIUS entry for the remote router would contain lines such as the
following:
node1 Password="top-secret"
Ascend-Metric=2,
Framed-Protocol=PPP,
Ascend-IP-Route=Route-IP-Yes,
Framed-Address=10.168.6.21,
Framed-Netmask=255.255.255.240,
Ascend-Primary-Home-Agent=10.1.2.3,
Ascend-Home-Agent-Password="private"