Filter
Top Products
3-82 MAX 6000/3000 Network Configuration Guide
Configuring WAN Access
Configuring MAXDAX
E=Termsrv
D=Diagnostics
V=View ChanGroup/s
To display the current MAXDAX channel-group mappings, press V or select V=View
ChanGroup/s. The current MAXDAX configuration appears, including a
channel-by-channel listing of channel groupings.
For example:
S:P:Ch Dest | ChanGroup
>1:1:01 777 | 0
1:1:02 777 | 0
1:1:03 777 | 0
1:1:04 777 | 0
1:1:05 777 | 0
1:1:06 777 | 0
1:1:07 777 | 0
1:1:08 777 | 0
1:1:09 777 | 0
1:1:10 777 | 0
1:1:11 777 | 333
1:1:12 333 | 777
In the channel-group display:
• S indicates the slot number. For a MAX 6000 unit, the slot number can be either 1 or 2.
For a MAX 3000 unit, the slot number is always 1.
• P indicates the T1/E1 lines in the slot. The unit supports two T1/E1 lines per slot.
• Ch indicates the channel number on the T1 line.
• Dest indicates the value specified for Net/T1 (E1) > Line Config > Line Config profile >
Line N > Net2Net Incoming Calls > Ch N Dest ChanGroup.
• ChanGroup indicates the value specified for Net/T1 (E1) > Line Config > Line Config >
Line N > Net2Net ChanGroup ID > Ch N ChanGroup for the specified channel.
ChanGroup is the group to which you have assigned the channel. When the unit receives a
call on a channel, it makes the outgoing call on the first available channel for which
Net/T1 (E1) > Line Config >
Line Config profile > Line N > Net2Net ChanGroup ID > Ch
N ChanGroup matches Net/T1 (E1) > Line Config >
Line Config profile > Line N >
Net2Net Incoming Calls > Dest ChanGroup for the channel on which the unit receives the
incoming call.
In the example, if the unit receives a call on channel 12 of the first line in the first slot, it places
the outgoing call on channel 11 of the first line in the first slot.
Note: The unit cannot make an outgoing call on the same channel on which it is receiving a
call. Make sure you do not configure a channel with identical channel-group and destination
channel-group numbers.
Examples of MAXDAX configuration (T1)
This section describes two MAXDAX environments, including specific parameter settings.