Filter
Top Products
Index
S
MAX 6000/3000 Network Configuration Guide Index-15
Resume command, 4-90
RetransmitInterval parameter
, 8-11
Reuse Addr Timeout parameter
, 9-26
Reuse Last Addr parameter
, 9-26
Reverse Charge parameter
, 6-8
RIP (Routing Information Protocol)
, 8-10, 9-33, 12-2
hop count limit
, 8-1
route convergence
, 8-1
static routes
, 9-60
RIP packet
, 4-33
RIP parameter
, 9-8, 9-33, 9-61
RIP Policy parameter
, 9-61
Rip Preference parameter
, 9-57
RIP Summary parameter
, 9-61
RIP updates, broadcasts
IPX routers
, 12-2
RIP-v1
, 9-61
Ethernet interface, enabling
, 9-8
recommendations
, 9-33
RIP-v2
, 9-61
Ethernet interface, enabling
, 9-8
recommendations
, 9-33
Rlogin parameter
, 4-85
robbed-bit signaling
configuring
, 3-15
route
calls, inbound
, 3-59, 3-66, 4-116
calls, outbound, 3-69
connections as routes
, 9-60
convergence, RIP vs OSPF
, 8-1
default route
, 9-59
flooding, preventing
, 8-6
port, exclusive
, 3-62
preferences
, 9-56
Route AppleTalk parameter
, 4-18
route filters
interfaces, applying to
, 15-25
Route IP parameter
, 4-18, 5-19, 5-22, 6-10, 9-31, 11-13
Route IPX parameter
, 4-18, 12-8, 14-13
Route Line N parameter
, 11-36
Route Line parameters
, 11-28
route preferences
configuring
, 9-60
route, RADIUS
, 9-58
router
configuration, verifying
, 12-7
mode (ATMP)
, 11-5
routers
backup designated (BDRs)
, 8-4
designated (DRs)
, 8-4
router-to-router connection
configuring IP address for
, 9-41
routes
OSPF
, 4-38
routing
a terminal-server session to a PPTP server
, 11-30
AppleTalk protocols
, 13-1
AppleTalk seeding
, 13-3, 13-5
parameters
, 4-18
Routing Information Protocol (IPX RIP)
default route
, 12-2
static route, configuring
, 12-14
Routing parameter
, 9-26
routing policies
, 9-10
Boot Protocol (BOOTP) requests
, 9-10
DHCP (Dynamic Host Configuration Protocol)
, 9-10
DNS (Domain Name System)
, 9-10
dynamic IP addressing
, 9-10
NAT (Network Address Translation)
, 9-10
WINS (Windows Internet Name Service)
, 9-10
Rpar? command
, 6-19
RPOA parameter
, 6-8
Rprof command
, 6-19
Rset command
, 6-19
RTMP (Routing Table Maintenance Protocol)
, 13-1
packets
, 13-3
RunOSPF parameter
, 8-10
S
SAP HS Proxy
parameters
, 12-11
SAP HS Proxy Net #N parameter
, 12-10
SAP HS Proxy parameter
, 12-10
SAP Reply parameter
, 11-13, 11-18
Sec DNS parameter
, 9-14
Sec Domain Name parameter
, 9-14
Sec History parameter
, 4-48
Sec WINS parameter
, 9-14
secondary IP address
, 9-7
security features
, 2-4
authentication protocols
, 2-4
callback security
, 2-4
Caller-ID authentication
, 2-5
card authentication
, 2-5
filters
, 2-5
firewalls
, 2-5
RADIUS servers
, 2-5
TACACS servers
, 2-5
terminal server
, 2-5
Security parameter
, 4-83
Security profile
Full Access
, 2-7