Filter
Top Products
Setting Up Virtual Private Networks
Configuring ATMP tunnels
MAX 6000/3000 Network Configuration Guide 11-21
IPX Frame=802.2
IPX Enet #=00000000
For details, see Chapter 12, “Configuring IPX Routing.”
2 Open the ATMP Options subprofile, set ATMP Mode to Home, and set Type to Gateway.
3 Specify the password used to authenticate the tunnel. It must match the
Ascend-Home-Agent-Password attribute of each mobile client’s RADIUS profile.
4 Set SAP Reply to Yes. The profile now has the following settings:
ATMP options...
ATMP Mode=Home
Type=Gateway
Password=private
SAP Reply=Yes
UDP Port=5150
GRE MTU=1472
Force fragmentation=No
Idle limit=0
ATMP SNMP Traps=No
5 Exit the profile and, at the exit prompt, select the exit and accept option.
6 Open a Connection profile and configure an IP routing connection to the Foreign Agent.
For example:
Ethernet
Connections
any Connection profile
Station=foreign-agent
Active=Yes
Encaps=MPP
Dial #=555-1213
Route IP=Yes
Encaps options...
Send Auth=CHAP
Recv PW=foreign-pw
Send PW=home-pw
IP options...
LAN Adrs=10.65.212.226/24
7 Open a Connection profile and configure a nailed WAN link that routes IPX to the home
network. For example:
Ethernet
Connections
any Connection profile
Station=homenet
Active=Yes
Encaps=MPP
PRI # Type=National (for ISDN PRI lines only)
Dial #=555-1212
Route IPX=Yes
Encaps options...
Send Auth=CHAP
Recv PW=homenet-pw
Send PW=my-pw