Filter
Top Products
Configuring IP Fax
Configuring IP fax options
MAX 6000/3000 Network Configuration Guide 7-11
In addition, the Ascend-CBCP-Trunk-Group attribute (115) applies to outgoing IP fax calls.
RADIUS attribute Value
NAS-Port Shelf, slot, line, and channel number from which the outgoing call
originates. The value appears in the following binary format:
FFSS SSLL LLLC CCCC
FF specifies the shelf number.
SSSS specifies the slot number.
LLLLL specifies the line number.
CCCCC specifies the channel number.
Each value is zero-based. For example, given the decimal number
13348, whose binary equivalent is 0011 0100 0010 0100:
00=shelf number 1
1101=slot number 14
00001=line number 2
00100=channel number 5
Acct-Session-Time Total connection time for a call. For an outgoing IP fax call, the
time period begins when the modem is reserved and ends when the
call is terminated.
Client-Port-DNIS Called number for an outgoing call.
Ascend-Modem-PortNo Modem port used for the call.
Ascend-Modem-SlotNo Number of the slot in which the modem card is physically located.
Ascend-Modem-ShelfNo Number of the shelf on which the modem card in located.
Acct-Input-Octets Total received bytes for the call.
Acct-Output-Octets Total transmitted bytes for the call.
Ascend-Xmit-Rate Negotiated transmitted baud rate for the call. For IP fax, transmit-
ted and received baud rates are the same.
Ascend-Data-Rate Negotiated received baud rate for the call. For IP fax, transmitted
and received baud rates are the same.
Attribute Value
Ascend-CBCP-Trunk-Group
(115)
Assigns the callback or outgoing IP fax call to a MAX trunk
group. The value of Ascend-CBCP-Trunk-Group is
prepended to the number that the MAX unit dials for callback
or an outgoing fax call. Specify a trunk-group number from
1
to
9.