Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-5Administering DEFINITY ECS
5
ATM Port Network Connectivity (ATM-PNC)
Each DEFINITY port network must be translated in the PPN’s screen with the full
ATM address (The ATM switch prefix, plus the port network’s ESI, plus a Selector
of 0) that uniquely identifies it.
Use the procedure in
Table 5-4
to administer ATM-PNC:
Table 5-4. ATM-PNC administration
√
Step Action Command Description
1. Log on DEFINITY
ECS switch
Use the
init
login to log on to the DEFINITY switch.
NOTE:
An
init
login is required to change customer
options and will be challenged by Access
Security Gateway (ASG). Contact your
regional CSA (customer software
administrator) to perform this function.
2. Turn on
ATM-PNC
change
system-parameters
customer-options
The Customer Options screen (Screen 5-2
) displays.
3. Set the mode to
yes
Set
Async.Transfer Mode (ATM) PNC?
field to
y
.
4. If duplicated
PNC (critical
reliability), set
PNC duplication
Set the
PNC Duplication?
field to
y
5. Log off the
DEFINITY ECS
Log off the DEFINITY system administration terminal.
6. Log onto the
DEFINITY ECS
Use the
craft
login to log on to the DEFINITY switch
(ignore any alarms at this time).
NOTE:
The
init
login is no longer required.
7. Administer ATM
PNC
Use the ATM worksheet in
Appendix A, ‘‘Baselining
the Customer’s Configuration’’ to record the
configuration.
8. Add new PNC add pnc next Add the next PNC.
9. Set location
address
Set the
Location:
field to the address of the ATM
circuit pack (in
01C01
- cabinet, carrier, slot format).
10. Assign network
name
Type a name in the
Name:
field to assign a unique,
15-character port network name.
Continued on next page