DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC
3-32ATM Network Duplication
3
Screen 3-1. DS1 circuit pack—T1
Screen 3-2. DS1 circuit pack—E1
ATM Network Duplication
ATM-PNC configurations without duplicated SPEs can be supported with
duplicated EPN connectivity to other points on an ATM network, or ATM network
duplication. These points can be on separate ATM switches, the same ATM
switch, or directly connected to an ATM-WAN.
add ds1 b10 Page 1 of 2
DS1 CIRCUIT PACK
Location: 01B10 Name: xxxxxxxxxxxxxxx
Bit Rate: 1.544 Line Coding: b8zs
Signaling Mode: isdn-pri
Connect: line-side
Country Protocol: 1
Protocol Version: a
Interface Companding: mulaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz
Slip Detection? n Near-end CSU Type: integrated
Alarm When PRI Endpoint Detached? y
add ds1 b10 Page 1 of 2
DS1 CIRCUIT PACK
Location: 01B10 Name: xxxxxxxxxxxxxxx
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: line-side
Country Protocol: 2
Protocol Version: a
Interface Companding: mulaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz
Slip Detection? n Near-end CSU Type: other
E1 Sync-Splitter? y Alarm When PRI Endpoint Detached? y