Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
ATM Switch Feature Interactions
B-15Delay Interactions
B
DCS Alphanumeric
Display for Terminals
Allows calls to or from alphanumeric-display terminals to have
transparency for call-related data. No impact for all of DCS features.
■ DCS Attendant Control of Trunk Group Access
■ DCS Attendant Direct Trunk Group Selection
■ DCS Attendant Display
■ DCS Automatic Callback
■ DCS Automatic Circuit Assurance
■ DCS Busy Verification of Terminals and Trunks
■ DCS Call Coverage
■ DCS Call Forwarding
■ DCS Call Waiting
■ DCS Distinctive Ringing
■ DCS Leave Word Calling
■ DCS Multiappearance Conference/Transfer
■ DCS Over ISDN-PRI D-channel
■ DCS Trunk Group Busy/Warning Indication
Do Not Disturb Allows guests, attendants, and authorized front-desk voice-terminal
users (those with console permission) to request that no calls, other
than priority calls, terminate at a particular extension until a specified
time. Affected by Time-of-Day issues.
Emergency Access to the
Attendant
Alerts an attendant if a station remains off-hook for more than the
administered period of time. This feature is affected by SVC setup
delays and failures.
Expert Agent Selection Routes incoming Automatic Call Distribution (ACD) calls to the agent
best qualified to handle the call.This feature is affected by SVC setup
delays and failures.
Facility Test Calls Allows you to test specific trunks, DTMF receivers, time slots, and
system tones from a phone. This feature is affected by SVC setup
delays and failures.
Generalized Route
Selection
Provides voice and data call-routing capabilities. This may be used
for routing to EPNs when knowledge of the WAN behavior is
available.
Go to Cover Allows users who call another internal extension to send the call
directly to coverage. This feature is affected by SVC setup delays and
failures.
Table B-5. ATM delay interactions — Continued
Feature Description
Continued on next page