Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
ATM Switch Feature Interactions
B-13Delay Interactions
B
Automatic Call Distribution
(ACD
Allows incoming calls to connect automatically to specific splits. This
feature is affected by SVC setup delays and failures.
Automatic Callback (ACB) Allows internal users who placed a call to a busy or unanswered
internal voice terminal to be called back automatically when the
called voice terminal becomes available. This feature is affected by
SVC setup delays and failures.
Automatic Incoming Call
Display
Allows the system to provide information about an incoming call when
the called party is active on a call. This feature is affected by SVC
setup delays and failures.
Automatic Transmission
Measurement System
(ATMS)
Measures transmission performance for voice and data trunk
facilities. This is affected by ATM-WAN problems.
Automatic Wakeup Allows attendants, front desk users, and guests to place an automatic
wakeup call to a certain extension at a later time. This feature is
affected by SVC setup delays and failures.
Bridged Call Appearance Allows single-line and multi-appearance voice-terminal users to have
an appearance of another user’s primary extension number. This
feature is affected by SVC setup delays and failures.
Busy Verification of
Terminals and Trunks
Allows attendants and specified multi-appearance voice-terminal
users to make test calls to trunks, voice terminals, and hunt DDC and
UCD groups.This feature is affected by SVC setup delays and
failures.
Call Coverage Provides automatic redirection of calls to alternate answering
positions in a Call Coverage path. This feature is affected by SVC
setup delays and failures.
Call Detail Recording
(CDR)
Collects detailed information about all incoming and outgoing calls on
specified trunk groups and, if you use intraswitch CDR, about calls
between designated extensions on the switch. No effect.
Call Forwarding Allows users to redirect calls to designated destinations. The feature
is affected by SVC setup delays and failures.
Call Park Allows users to put a call on hold and then retrieve the call from any
other voice terminal within the system. This feature is affected by SVC
setup delays and failures.
Call Pickup Allows a voice-terminal user to answer calls that alert other extension
numbers within the user’s specified call pickup group. This feature is
affected by SVC setup delays and failures.
Call Prompting Uses specialized vector commands to process incoming calls based
on information collected from the caller or from an ISDN-PRI
message. This feature is affected by SVC setup delays and failures.
Table B-5. ATM delay interactions — Continued
Feature Description
Continued on next page