DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-27Administering DEFINITY ECS
5
Field description:
Screen 5-12. Locations—screen 1
NOTE:
Upgrades from a previous software version default to a single location
(location 1) with the values shown in Screen 5-12
. The
Number Plan
Area Code
is the home NPA from the dial plan screen of the earlier
release.
Field description:
Location Location number associated with the cabinet (range is 1-44, default 1).
■ Field cannot be blank
■ Location is display-only if the Multiple locations field (change
system-parameters customer-options) is not set to y.
ARS Prefix 1
Required For
10-Digit NANP
Calls?
This field is set to y if all 10-digit NANP calls (those marked as FNPA in the
ARS analysis tables) must be preceded by a digit ‘1’ (commonly called the
toll prefix); otherwise, it is set to n.
NOTE:
Many areas in the United States have changed to 10-digit dialing for
local calls, and administration for this field and the ARS analysis
entries must reflect these changes.
Number This read-only field uniquely identifies a location. Valid values range from
1 to 44.
change locations Page 1 of 3
LOCATIONS
ARS Prefix 1 Required For 10-Digit NAMP Calls? y
Number Name Timezeone Daylight-Savings Number Plan
Offset Rule Area Code
1 Main + 00:00 0
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :
12 :
13 :
14 :