Filter
Top Products
Installing a DEFINITY ECS ATM-CES
2-1Equipment Installation
2
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
2
Installing a DEFINITY ECS
AT M -C E S
This chapter describes the procedures for installing a new DEFINITY ECS
Release 8 ATM-CES The procedure is simple in that you install the DEFINITY ECS
then install the ATM switch and the TN2305/TN2306 interface circuit packs.
Making it an ATM-CES is done administratively (refer to
Chapter 5, ‘‘Administering
ATM-PNC and ATM-CES’’).
NOTE:
ATM-CES works only with TN2305/TN2306 ATM interface circuit packs.
Equipment Installation
To prepare for a new DEFINITY ECS ATM-CES installation, you need to install the
DEFINITY ECS first. For instructions on installing DEFINITY ECS, refer to the
following installation books:
■ DEFINITY Enterprise Communications Server Release 8 Installation and
Test for Multicarrier Cabinets
■ DEFINITY Enterprise Communications Server Release 8 Installation and
Test for Single-Carrier Cabinets
■ DEFINITY Enterprise Communications Server Release 8 Installation,
Upgrades, and Additions for Compact Modular Cabinets
Review the reliability configurations for DEFINITY Release 8 ATM (refer to
Figure
1-2 through
Figure 1-4
).
The slot restrictions for a CES configuration are similar to ISDN-PRI circuit packs.
In PPNs and EPNs, ATM interface circuit packs can occupy any available slot in
a port carrier.