Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-28Administering DEFINITY ECS
5
Screen 5-13. Daylight savings rules screen
Field description:
Name This15-character field identifies the location but may be blank for any given
location (default = y).
Timezone
Offset
This field specifies the time offset from the system standard time. Set a
value in the ±, hour (0-23),and minute (0-59) areas, as these fields cannot
be blank for an administered location.
Number This field is the number assigned to the administered, customized rule
(0 to 15) for this location. Each rule consists of the week, day, month, and
time that daylight savings starts and stops.
■ Rule 0 is no daylight savings time and is not alterable.
■ Rule 1 defaults to the U.S. daylight savings time rule but may be
altered or deleted.
Number Plan
Area Code
This field is the numbering plan area code appropriate for this location
(can be blank).
Change Day The day of the week, or date that the change takes effect.
Month The month the change takes effect.
Date The date on or after which the change takes place.
Time 2 fields that specify the hour (0-23) and minute (0-59) that the change
takes effect (in 24-hour format)
change daylight-savings-rules Page 1 of 2
DAYLIGHT SAVINGS RULES
Rule Change Day Month Date Time Increment
0: No Daylight Savings
1: Start: first Sunday on or after April 1 at 2 :0 1 :0
Stop: first Sunday on or after October 25 at 2 :0
2. Start: first on or after at 0 : 0 :
Stop: first on or after at 0 :
3. Start: first on or after at 0 : 0 :
Stop: first on or after at 0 :
4. Start: first on or after at 0 : 0 :
Stop: first on or after at 0 :
5. Start: first on or after at 0 : 0 :
Stop: first on or after at 0 :
6. Start: first on or after at 0 : 0 :
Stop: first on or after at 0 :
7. Start: first on or after at 0 : 0 :
Stop: first on or after at 0 :