Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-19Administering DEFINITY ECS
5
Screen 5-6. Signaling group
Table 5-9. Country and protocol version supported (for Screen 5-6)
Value Country Protocol supported
1-a United States, Canada AT&T TR41449/41459 (tested with AT&T,
Canadian, and MCI networks)
1-b United States Bellcore TR 1268; NIUF.302; ANSI T1.607
2 Australia AUSTEL TSO14.1; Telecom Australia TPH 1856
3 Japan NTT INIS-NET
4 Italy ETS 300 102
5 Netherlands ETS 300 102
6 Singapore ETS 300 102
7 Mexico ETS 300 102
8 Belgium ETS 300 102
9 Saudi Arabia ETS 300 102
10-a United Kingdom ETS 300 102 (for connection to DASS II/DPNSS
through external converter)
10-b United Kingdom ETS 300 102 (Mercury) British Telecom ISDN 30
11 Spain Telefonica ISDN Specification
12-a France VN4 (French National PRI)
Continued on next page
add signaling-group Page 1 of 6
SIGNALING GROUP
Group Number: 2 Group Type: atm Name:
Max number of NCA TSC: 0
D-Channel: Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a
CIRCUIT PARAMETERS
Virtual Path Identifier: 0
Virtual Channel Identifier:
Signaling Mode: isdn-pri Circuit Type: T1
Idle Code: 11111111 Connect: pbx
Interface Companding: mulaw
Country Protocol: 1
Protocol Version: a
DCP/Analog Bearer Capability: 3.1kHz
Interworking Message: PROGress