Lucent Technologies Comcode 108678723 Server User Manual


 
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-23Administering DEFINITY ECS
5
Additional DEFINITY ECS administration
After administering the ATM-PNC or ATM-CES, you may need to do some further
administration, specifically:
Locations
SVC cache (PNC only)
Gain/Loss adjustments (PNC only)
Locations
The DEFINITY ATM-PNC makes it easier for the DEFINITY ECS to have port
networks in multiple time zones. To handle distances between the PPN and its
EPNs, the system tracks one or more locations by assigning each cabinet a
location number. All locations must be in the same country code.
If upgrading from a pre-Release 7, you may need to set the locations for your
EPNs. To administer locations, follow the procedure in Table 5-11
.
NOTE:
The screens and field description follow the table.
Table 5-11. Administer location procedure
Step Action Description
1. Activate the feature Type change system-parameters customer-options and
press
Enter. (Init password required.)
The Customer Options screen displays.
Go to screen 3 (Screen 5-10).
2. Set multiple locations Change the value in the Multiple locations field to y
and press
Enter.
NOTE:
The system is limited to a single location unless this
field is changed.
3. Verify feature
activation
Ty p e display system-parameters customer-options and
press Enter.
The Customer Options screen displays (Screen 5-10
).
Go to screen 2 and verify that the Multiple locations
field is set to y.
4. Change cabinet
administration
Ty p e change cabinet n (cabinet number) and press
Enter.
The Cabinet screen displays (Screen 5-11
).
Continued on next page