Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-16Administering DEFINITY ECS
5
30. Set final fields Set the following fields (tabbing goes horizontally):
■ Group Type: field to isdn.
NOTE:
A trunk group can contain either ISDN or ATM
trunks, but not both.
■ The CDR Reports field defaults to y.
■ The Carrier Medium: field to ATM.
■ The TAC: field to match customer’s dial plan.
■ The Dial Access? field defaults to n.
■ The Service Type: field to tie.
Go to screen 6 and add the channel-to-port mapping
(Screen 5-10). You must have the same number of entries
as port numbers in step 28.
Press Enter to save the changes.
31. Save translations Type save translation and press Enter.
Table 5-8. ATM-CES administration — Continued
√ Step Action Description
Continued on next page