Filter
Top Products
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration
555-233-124
Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-22Administering DEFINITY ECS
5
Changing the port-to-channel mapping
Use the following steps to change the port-to-channel mapping for emulated
circuits:
1. Type
busyout atm signaling-group
siggrpnbr
and press Enter to busyout
the signaling group.
2. Type
change trunk-group
trkgrpnbr
and press Enter.
Remove any port administration on screen 6.
3. Type
change signaling-group
siggrpnbr
.
Modify the port-to-channel mapping.
4. Type
change trunk-group
trkgrpnbr
and press Enter.
Add the ports back in on screen 6, using new port numbers, if desired.
5. Type
release atm signaling-group
siggrpnbr
and press Enter to release
the signaling group.
The display shows the command aborts, but the D-channel and
B-channels come up.
DEFINITY commands for CES
Administration commands that are useful in working with CES are listed in Table
5-10.
Table 5-10. ATM administration commands
Command Description
display circuit-packs
cabinet
Displays the packs in the cabinet, identifying ATM Trunk as
well as ATM PNC EI boards. ATM Interface boards have not
been specified as CES or PNC yet.
display atm ports
eqloc
Displays the 256 ports on the ATM board with the
corresponding signaling and trunk group.
list configuration atm Lists the ATM boards, identifying equipment location, board
code, type, and vintage.
list configuration trunks Lists boards identifying assigned ports. Although the ATM
board is listed, the 256 ports are not.