Filter
Top Products
Exit Menu
Using System Setup
88
N
OTE
:
If you want to start the system using a bootable CD, change the ATAPI CD-ROM
Drive to be the first priority and make sure the Auto is set in the Type field of the
Secondary Master Submenu at Main page, and also make sure that Enabled is
set in the Bootable CD check field at Boot page.
Exit Menu
Select
Exit
or press [Esc] from the menu bar to display the
Exit
menu.
N
OTE
:
Pressing [Esc] does not exit this menu. You must select one of the options from
this menu or a menu bar item to exit this menu.
TABLE 18. Exit Menu
Feature Option Description
Exit Saving
Changes:
Yes
No
Enables you to
exit System Setup and saves your
changes. When you select this item and press [Enter], a
message appears asking you if you want to save your
changes and exit System Setup. Choose
Yes
and press
[Enter] to save your changes and exit. Choose
No
and
press [Enter] to remain in System Setup.
Exit
Discarding
Changes:
Yes
No
Enables you to exit System Setup without saving your
changes. When you select this item and press [Enter] a
message appears asking you if you want to save changes
before exiting. Choose
No
and press [Enter] to exit
without saving changes. Choose
Yes
and press [Enter] to
save changes and exit.
Load Setup
Defaults:
Yes
No
Loads the default values for all System Setup parameters.
When you select this option and press [Enter], a message
appears asking if you want to load the default
configuration. Choose
Yes
and press [Enter] to load
default settings and remain in System Setup. Choose
No
and press [Enter] to retain your changes and remain in
System Setup.
Smart Battery
Calibration:
Enables you to discharge the system battery completely
for a more accurate battery level detection. This option
only works with the smart battery if the AC Adapter is not
plugged in.