Filter
Top Products
6.11USING F-CODE FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
USING F-CODE BOX FEATURES
Sending a document with a subaddress and password
1
Switch to the Fax mode by pressing COPY
FAX
SCAN.
2
Place the document on the ADF or document glass.
Adjust the document mode and contrast if necessary.
3
Press ADVANCED FUNCTIONS until “F-Code Tx” appears on the LCD then press ENTER.
F-Code Tx
/
/Enter
– or –
Press the soft key which assigned “F-Code Tx”.
Enter Sub-Address
_
4
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press
ENTER.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
5
Use the numeric keys to enter the ITU-T password.
Then press
ENTER.
If you do not need to enter ITU-T password, press
ENTER without entering any number.
Enter Fax Number
_
6
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
7
Press START. Your machine begins scanning the document.
== Command:01 ==
Then, your machine dials and sends the document with the subaddress and password.
To cancel the sending in progress, press
FAX CANCEL and CANCEL, CANCEL.
To cancel the delayed sending, press
FAX CANCEL, search the command number you
want to cancel using the cursor key, then press
CANCEL, CANCEL. (See also “Reviewing
or canceling command” on page 4.8.)
NOTE:
•
The document glass is available only for MFX-1330 model.
•
If you frequently dial the same destination with subaddress (and password), use the
macro key at your convenience. For details of the macro key, see page 8.4.