Filter
Top Products
2.15GETTING STARTED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
GETTING STARTED
Loading paper in bypass tray
When you need to use a size of paper not currently loaded in the paper cassette, or when
you want to print on a envelope, transparency film or custom sized paper, use the bypass
tray.
NOTE: Always load only use print media specified in “Acceptable paper size” on page 2.12 to
avoid paper jams and print quality problems.
1
Open the bypass tray on the right side of your machine. Spread the paper support
extension.
2
To set the paper, 1) raise the flapper release lever 2) load the paper until it comes to a stop.
3
1) Adjust the paper guides to fit the paper, 2) then lower the flapper release lever.