Filter
Top Products
10.6 MACHINE SETTINGS
Copy settings
The copy settings allows you to customize various setting of copy setting to match your needs.
Accessing the copy setting
1
Press MENU, 2, 3.
[Program] No.23_
3 Copy Settings
2
Press ENTER.
[Program] No.231
1 Scan Parameters
3
Use or to search the item you want to set or change and press ENTER.
4
Change setting and press ENTER. For details of each settings, refer to the following
table:
5
When you have finished, press RESET to return to the standby mode.
The underlined settings are the factory defaults.
1 Scan Parameters
Doc. Type You can choose one of the following for the default.
Text, Photo&Text,
Photo
Contrast You can choose one of the following for the default.
Normal, Dark, Darkest, Light , Lightest
2 Auto Reset Time The machine returns to its initial condition automatically in a certain
period of time. You can change this time from 01 to 10 minutes.
03 min.
3 Copy Auto The machine automatically selects the recording paper size according to
the document size and enlargement/reduction rate. You can change it to
select the document size or enlargement/reduction rate automatically,
instead of the recording paper size.
Paper Size The paper will be selected automatically according to the
document size and copy ratio.
Reduction Copy ratio will be set automatically according to the paper
size and document size.
Doc. Size Document size will be set automatically according to the
paper size and copy ratio.
4 Copy Protect Protects that the switching to the copy mode. See page 9.13.
5 Sort Copy Default setting of the sort copy.
ON The copies can be assembled as sets in sequential order.
OFF The copies will be
printed on a page-by-page basis.
6 Combine Default setting of the combine copy.
ON The machine always performs the combine copies.
OFF The machine does not make combine copies until you set it
manually.