Filter
Top Products
6.12 USING F-CODE FEATURES
Polling a document with a subaddress and password
1
Switch to the Fax mode by pressing COPY
FAX
SCAN.
2
Press ADVANCED FUNCTIONS until “F-Code Polling” appears on the LCD then press
ENTER.
F-Code Polling
/
/Enter
– or –
Press the soft key which assigned “F-Code Polling”.
Enter Sub-Address
_
3
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press
ENTER.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
4
Use the numeric keys to enter the ITU-T password.
Then press
ENTER.
If you do not need to enter ITU-T password, press
ENTER without entering any number.
Enter Fax Number
_
5
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
6
Press START.
== Command:01 ==
Your machine dials the number and polling the document from the remote F-code
compatible machine.
To cancel the polling in progress, press
FAX CANCEL and CANCEL, CANCEL.
To cancel the delayed polling, press
FAX CANCEL, search the command number you want
to cancel using the cursor key, then press
CANCEL, CANCEL. (See also “Reviewing or
canceling command,” on page 4.8.)