Filter
Top Products
10.4 MACHINE SETTINGS
Fax settings
The fax settings allows you to customize various setting of fax setting to match your needs.
Accessing the fax setting
1
Press MENU, 2, 2.
[Program] No.22_
2 Fax Settings
2
Press ENTER.
[Program] No.2201
01 Scan Parameters
3
Use or to search the item you want to set or change and press ENTER.
4
Change setting and press ENTER. For details of each settings, refer to the following
table:
5
When you have finished, press RESET to return to the standby mode.
The underlined settings are the factory defaults.
01 Scan Parameters
Resolution You can choose one of the following.
Normal Scan at 8 dots/mm × 3.85 lines/mm.
Fine Scan at 8 dots/mm × 7.7 lines/mm.
S-Fine Scan at 8 dots/mm × 15.4 lines/mm.
Gray Scan at 8 dots/mm × 7.7 lines/mm.
Contrast You can choose one of the following.
Normal, Dark, Darkest, Light or Lightest.
S-Fine Resol.
You can choose one of the following.
400dpi, 600dpi
02 Print Parameters
Rx Reduc. Rate (Refer the page 5.6.)
Auto Automatically reduces printouts at vari-
able rates down to a minimum of 50%. Tries
to reduce printout to fit on one sheet of your
selected paper size. If it can’t, print the received
document at 100% size on two or more pages.
100% Does not reduce the received documents.
Margin Set the reduction margin for Auto reduction. (00 to 85 mm)
40 mm
Half Page Recpt.*
OFF Not combine the half-page receptions.
ON Combines two of half-page receptions onto a
single sheet.
* When the optional duplex unit is installed in MFX-1330 model, the
following menu is displayd.
Paper Save
OFF Not perform either half-page receptions or
duplex receptions.
H.Page Rx Combines two of half-page receptions onto a
single sheet.
Duplex Rx Combines and prints the received two one-sided
pages onto both sides of a single sheet.