Muratec MFX-1330 All in One Printer User Manual


 
2.3GETTING STARTED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
GETTING STARTED
To change upper and lower case
Press key to toggle upper case and lower case.
Your Name ;Upper
_
Your Name ;Lower
_
The word “Upper” means the machine will enter only upper-case letters.
The word “Lower” means the machine will enter only lower-case letters.
Entering the symbol
You can also enter special characters or symbols.
1
When the machine prompts you to enter a name, press key.
The LCD changes to:
////
Enter
2
Select the character you want to enter using , , or key.
3
To enter the character, press ENTER key.
4
If you want to enter other character, repeat steps 1 to 3.
Otherwise, go to next step.
5
Press ENTER to save it.
Correct the character
If you entered an incorrect letter or digit, press CANCEL to erase to the left.
To change just one character or digit, press
or to move the cursor to that character
or digit. Then press
CANCEL to erase it. Re-enter the correct character or digit.
Memory back-up
User data and auto-dialing settings are backed-up.
However, the documents stored in memory will be lost in 72 hours after there is a power
failure or if you disconnect the power cord. (See “Specifications,” page AI.2.)