Filter
Top Products
2.4 GETTING STARTED
How to select the function
The setting of the function starts by pressing the MENU key first.
There are two ways for function selecting, as below.
In this manual, we explain the operation with short-cut operations.
Short-cut operation with the numeric keys
Press ENTER, then press three- or four-digit numbers to select the function.
For example, “Press
MENU, 2, 1, 0, 1, ENTER”…
… you’d press
MENU key
… then
2
… then
1
… then
0 (the numeric key zero)
… then
1
… and then
ENTER
Searching the function using the cursor key
Even if you don’t remember the exact commands needed for an operation, you can search
for and enter the function using the cursor key (
, , , ).
To search function:
1
Press the MENU key.
2
Search the function using , , or key.
The function table is useful for your search (see next page).
For example, if you want to set the “Cassette Size,” press
, , .
3
Press ENTER when you find the function you want to set.
Go back to the previous screen by pressing BACK key
Press BACK, you can go back to previous menu level.