Filter
Top Products
3.9AUTODIALER & DIALING OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
AUTODIALER & DIALING OPTIONS
Call group dialing
If you frequently send the same fax message to many destinations, use the call group
dialing. Call group can store many one-touch keys and speed-dial numbers, so you can
broadcast the fax message by simply perform the group dialing operation.
Entering or changing a call group
Your machine can store up to 32 call groups.
1
Press MENU, 1, 3, 1, ENTER. The empty call group number will be shown:
Enter Group No.
01:No Number Stored
2
Press or to select a call group number.
You can also select a call group by directly entering that two-digit identifier code (01-32).
3
Press ENTER.
01:Enter One-T/Speed
_
4
Enter the one-touch numbers and the speed-dial numbers you want to store into the
call group by pressing the one-touch key or
SPEED DIAL /GROUP key followed by three-
digit code. A comma will be automatically inserted between each number.
01:Enter One-T/Speed
[01],[03],S001_
If you want to enter all the one-touch and speed-dial numbers currently stored in your
machine, press “
” without any characters.
01:Enter One-T/Speed
*_
5
Press ENTER.
01:Name ;Upper
_
6
Use the numeric keys to enter the name for the group number.
The name can be stored up to 24 characters.
(Regarding how to enter the character, refer “Entering character” on page 2.2.)
To change a name, press
or to move the cursor, press CANCEL to erase the name.
Then re-enter the correct name.
7
Press ENTER to save the setting.
The next empty call group will be shown.
8
To enter another call group, repeat the procedure from step 2.
To exit and return to the standby mode, press
RESET.
NOTE: To print a list of call group, press MENU, 5, 1, 0, 9, ENTER. Then select group number and
press
ENTER.