Filter
Top Products
12.23MAINTENANCE & PROBLEM SOLVING
1
2
3
4
5
6
7
8
9
10
11
12
A
MAINTENANCE & PROBLEM SOLVING
Printouts have white and/or
black lines
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
• The ADF glass or rollers of the ADF may be dirty.
Clean the ADF glass and/or the rollers of the ADF. (See pages 12.2 to 12.3.)
• The drum charge wire may be dirty.
Open the front cover, then gently pull and push back the blue rod to clean the
drum charge wire. (See page 12.3.)
• The toner cartridge or drum cartridge may be defective.
Remove the cartridges and check them for damage.
If the problem persists, replace either or both of the cartridges as indicated.
Printouts have toner smudges
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
• The document glass* is dirty.
Wipe the document glass* with a dry soft cloth.
• The document pad* is dirty.
Clean the document pad* with a soft cloth dampened with a mild detergent.
• The toner cartridge or drum cartridge may be defective.
Remove the cartridges and check them for damage. If the problem persists,
replace either or both of the cartridges as indicated.
• If you find smudges on the back of the printouts, the transport roller may be dirty.
Your machine normally cleans the transport roller automatically. If other solutions
fail, please
contact your Muratec dealer.
The image is not aligned prop-
erly on the paper.
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
• The document is not positioned correctly.
Correctly position the document against the document scales. If you are using the
ADF, correctly adjust the document guides for the size of the document.
• The ADF glass is dirty (while using the ADF).
Wipe the ADF glass with a dry soft cloth. (See page 12.2.)
• The document guides are not slid up against the edges of the document.
Slide the document guides against the edges of the document.
• Curled paper was loaded into the paper cassette.
Flatten the paper before loading it.
* The document glass and the document pad is available only for MFX-1330 model.