Filter
Top Products
8.6 SPECIAL FEATURES
8
Enter the macro name by using the numeric keys. (If necessary, review “Entering
character,” page 2.2) It can be store up to 130 characters.
9
Press ENTER to finish.
NOTE: To print a list of macro keys, press MENU, 5, 1, 1, 8, ENTER.
Erasing a Macro key
1
Press MACRO PROGRAM twice.
2.Erase Macro
/
/Enter
2
Press ENTER.
3
Press the macro key you want to erase.
4
Press ENTER. The following two displays will appear alternately:
M1:Erase Macro
Yes Enter
M1:Erase Macro
No Cancel
5
Press ENTER to erase the macro.
If you want to quit without erasing, press
CANCEL.
6
To erase another macro, repeat procedures from step 3.
Press
RESET to return to standby mode.
Setting the speed for Macro
You can adjust the speed of one step in the Macro key.
1
Press MACRO PROGRAM three times.
3.Macro Speed
/
/Enter
2
Press ENTER.
3
Press or to select the mode you want appears. The possible settings are
“Normal”, “Slow” or “Fast”.
4
Press ENTER to save the setting.
5
Press RESET to exit.