Filter
Top Products
2.6 GETTING STARTED
Level one
function menu
Level two
function menu
Level three
function menu
Description Setting Page
2. User
Settings
1. Machine
Settings
07. Primary
Mode
You can set the primary standby mode.
Scan
Copy
Fax
10.3
08. Service
Mode
For technical support. Do not turn this setting
to on unless an authorized technician asks
you to do so.
Off
On
10.3
09. Date &
Time
Enter the current date and time — 10.3
10. Paper
Source
Select the paper source for faxing or copying.
Fax
Copy
Fax/Copy
Not Used
10.3
11. Page
Counter
Displays the total number of pages you have
printed and scanned.
— 8.8
2.Fax
Settings
01. Scan
Parameters
You can set the following settings for fax
sending.
• Primary fax resolution
• Primary scanning contrast
• Super fine resolution
Normal, Fine,
S-Fine, Gray
Lightest, Light,
Normal, Dark,
Darkest
400dpi, 600dpi
10.4
02. Print
Parameters
You can set the following settings for fax
reception.
• Reduction rate
• Reduction margin
• Half-page reception*
* When the optional duplex unit is installed
in MFX-1330 model, the following menu is
displayed.
• Paper save function
Auto, 100%
40 mm (0-85 mm)
Off, On
Off, H. Page Rx,
Duplex Rx
5.7
10.4
03. # of Rings
Set the number of rings before your machine
answers.
2 times (1-10 times) 5.6
10.5
04. Redial
Set the number of times and interval for
automatic fax redialing.
2 times (2-15 times)
1 min. (1-5 min.)
10.5
05. Dialing
Pause
Set dialing pause length. 2 sec. (2-10 sec.) 10.5
06. Memory Tx
On/Off setting of Memory transmission. Off
On
4.3
10.5
07. Quick Tx
On/Off setting of Quick Memory transmis
-
sion.
Off
On
4.3
10.5
08. Select TTI
Select TTI you want to send.
Default
TTI1
TTI2
TTI3
Off
4.17
09. ECM Mode
On/Off setting of ECM mode.
Off
On
10.5
10. Block Junk
Fax
Reject the fax reception from unauthorized
incoming faxes.
Off
Mode1
Mode2
Mode3
5.9
11. Security
Rx
Keep all received fax messages in memory
and after print them manually.
Off
On
11.3
12. Separator
Page
Partition each received documents by insert
-
ing the separator page.
Off
On
5.14